 |
| ITEM | PRODUCTS | SOLID CONTENT | MOLECULAR WEIGHT | DEGREE OF HYDROLYSIS | REMARKS |
| A2001 | Nonionic Polyacrylamide | 89% MIN | 900 | 4-5% | |
| A2002 | 1000 | 1-2% | |||
| A2021 | 1100 | 4-5% | |||
| A2003 | Anionic Polyacrylamide | 89% MIN | 1100 | 30% | |
| A2004 | 1600-1700 | 11-13% | HOT SALE | ||
| A2005 | 1700-1800 | 18-20% | |||
| A2006 | 1700-1800 | 20-22% | |||
| A2007 | 1800-1900 | 23-25% | |||
| A2008 | 1800-2000 | 24-26% | |||
| A2009 | 1800-2000 | 24-26% | |||
| A2010 | 1400-1600 | 27-30% | |||
| A2011 | 1800-2000 | 27-29% | |||
| A2012 | 3000-3500 | 28-35% | |||
| A2013 | 2500-3000 | 25-30% |
FAQ
What is Polyacrylamide?
Polyacrylamide is a high molecular weight polymer formed by the polymerization of acrylamide monomers. It has excellent water retention, adsorption, and gelation properties, making it widely used in various industrial and environmental fields.
What is the difference of acrylamide and polyacrylamide?
the key difference between acrylamide and polyacrylamides is that polyacrylamide is a polymer and acrylamide is the sub unit used to produce polyacrylamide molecules. Therefore, acrylamide is considered as a small molecule whereas polyacrylamide has a high molecular weight.
What is the difference between anionic and cationic polyacrylamide?
polyacrylamide anion type Pam is suitable for high concentrations of positively charged inorganic suspensions, as well as coarse suspended particles (0.01-1mm), with a ph value of neutral or alkaline solution. Polyacrylamide cationic Pam is suitable for suspending materials with negative charge and organic matter.
What products can Polyacrylamide manufacturers provide?
Polyacrylamide manufacturers can provide different types of Polyacrylamide products, including cationic polymers, non-ionic polymers, and anionic polymers. These products can be provided in solid powder, granule, or solution form according to different needs.
The random discharge of construction mud generated by construction projects can easily lead to river blockage and environmental pollution; reverse transportation by tank trucks can not only cause traffic congestion and road damage, but the mud unloading points will also have a certain impact on the environment. When pouring cast-in-place piles, a large amount of clay, including sand and gravel, etc. will be produced. The mud contains a large amount of suspended liquid of fine mud particles and has a relatively large consistency, so it is difficult to settle naturally. Polyacrylamide needs to be used as a mud-water separation agent, which can achieve a good flocculation effect.
The characteristics of mud depend on its composition and are related to local geological conditions. The specific agent to be used needs to be determined based on on-site sludge selection experiments. The more common ones are anionic polyacrylamide and nonionic polyacrylamide, which are also useful. Low ionicity cationic. Sometimes, in order to make the effluent clearer, it needs to be used together with inorganic flocculants such as PAC. Some commonly used mud-water separation and treatment equipment are mostly plate and frame filter presses, but belt filter presses and geotechnical pipe bags are also used.
In piling mud, a small trial selection of anions for piling mud must be carried out according to the characteristics of the mud to determine which type of anion is most suitable for the mud that needs to be treated. Therefore, the selection is very important for the role and efficacy of polyacrylamide. Importantly, we cannot simply think that lower molecular weight is better or higher is better. It depends on the results of beaker experiment selection.
Zoomri can support you to choose the suitable anionic polayacrylamide for Construction Piling Mud.
| ITEM | PRODUCTS | SOLID CONTENT | MOLECULAR WEIGHT | DEGREE OF HYDROLYSIS | REMARKS |
| A2001 | Nonionic Polyacrylamide | 89% MIN | 900 | 4-5% | |
| A2002 | 1000 | 1-2% | |||
| A2021 | 1100 | 4-5% | |||
| A2003 | Anionic Polyacrylamide | 89% MIN | 1100 | 30% | |
| A2004 | 1600-1700 | 11-13% | HOT SALE | ||
| A2005 | 1700-1800 | 18-20% | |||
| A2006 | 1700-1800 | 20-22% | |||
| A2007 | 1800-1900 | 23-25% | |||
| A2008 | 1800-2000 | 24-26% | |||
| A2009 | 1800-2000 | 24-26% | |||
| A2010 | 1400-1600 | 27-30% | |||
| A2011 | 1800-2000 | 27-29% | |||
| A2012 | 3000-3500 | 28-35% | |||
| A2013 | 2500-3000 | 25-30% |
FAQ
What is Polyacrylamide?
Polyacrylamide is a high molecular weight polymer formed by the polymerization of acrylamide monomers. It has excellent water retention, adsorption, and gelation properties, making it widely used in various industrial and environmental fields.
What is the difference of acrylamide and polyacrylamide?
the key difference between acrylamide and polyacrylamides is that polyacrylamide is a polymer and acrylamide is the sub unit used to produce polyacrylamide molecules. Therefore, acrylamide is considered as a small molecule whereas polyacrylamide has a high molecular weight.
What is the difference between anionic and cationic polyacrylamide?
polyacrylamide anion type Pam is suitable for high concentrations of positively charged inorganic suspensions, as well as coarse suspended particles (0.01-1mm), with a ph value of neutral or alkaline solution. Polyacrylamide cationic Pam is suitable for suspending materials with negative charge and organic matter.
What products can Polyacrylamide manufacturers provide?
Polyacrylamide manufacturers can provide different types of Polyacrylamide products, including cationic polymers, non-ionic polymers, and anionic polymers. These products can be provided in solid powder, granule, or solution form according to different needs.
The random discharge of construction mud generated by construction projects can easily lead to river blockage and environmental pollution; reverse transportation by tank trucks can not only cause traffic congestion and road damage, but the mud unloading points will also have a certain impact on the environment. When pouring cast-in-place piles, a large amount of clay, including sand and gravel, etc. will be produced. The mud contains a large amount of suspended liquid of fine mud particles and has a relatively large consistency, so it is difficult to settle naturally. Polyacrylamide needs to be used as a mud-water separation agent, which can achieve a good flocculation effect.
The characteristics of mud depend on its composition and are related to local geological conditions. The specific agent to be used needs to be determined based on on-site sludge selection experiments. The more common ones are anionic polyacrylamide and nonionic polyacrylamide, which are also useful. Low ionicity cationic. Sometimes, in order to make the effluent clearer, it needs to be used together with inorganic flocculants such as PAC. Some commonly used mud-water separation and treatment equipment are mostly plate and frame filter presses, but belt filter presses and geotechnical pipe bags are also used.
In piling mud, a small trial selection of anions for piling mud must be carried out according to the characteristics of the mud to determine which type of anion is most suitable for the mud that needs to be treated. Therefore, the selection is very important for the role and efficacy of polyacrylamide. Importantly, we cannot simply think that lower molecular weight is better or higher is better. It depends on the results of beaker experiment selection.
Zoomri can support you to choose the suitable anionic polayacrylamide for Construction Piling Mud.
苏公网安备 32100302010854号 
